This is pm-gawk.info, produced by makeinfo version 7.1 from
pm-gawk.texi.

Copyright © 2022, 2025 Terence Kelly
<tpkelly@eecs.umich.edu>
<tpkelly@cs.princeton.edu>
<tpkelly@acm.org>
<https://web.eecs.umich.edu/~tpkelly/pma/>
<https://dl.acm.org/profile/81100523747>

Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.3 or
any later version published by the Free Software Foundation; with the
Invariant Sections being "Introduction" and "History", no Front-Cover
Texts, and no Back-Cover Texts.  A copy of the license is available at
<https://www.gnu.org/licenses/fdl-1.3.html>
INFO-DIR-SECTION Text creation and manipulation
START-INFO-DIR-ENTRY
* pm-gawk: (pm-gawk).    Persistent memory version of gawk.
END-INFO-DIR-ENTRY


File: pm-gawk.info,  Node: Top,  Next: Introduction,  Up: (dir)

General Introduction
********************

‘gawk’ 5.2 introduced a _persistent memory_ feature that can "remember"
script-defined variables and functions across executions; pass variables
between unrelated scripts without serializing/parsing text files; and
handle data sets larger than available memory plus swap.  This
supplementary manual provides an in-depth look at persistent-memory
‘gawk’.

Copyright © 2022, 2025 Terence Kelly
<tpkelly@eecs.umich.edu>
<tpkelly@cs.princeton.edu>
<tpkelly@acm.org>
<https://web.eecs.umich.edu/~tpkelly/pma/>
<https://dl.acm.org/profile/81100523747>

Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.3 or
any later version published by the Free Software Foundation; with the
Invariant Sections being "Introduction" and "History", no Front-Cover
Texts, and no Back-Cover Texts.  A copy of the license is available at
<https://www.gnu.org/licenses/fdl-1.3.html>

* Menu:

* Introduction::
* Quick Start::
* Examples::
* Performance::
* Data Integrity::
* Acknowledgments::
* Installation::
* Debugging::
* History::


File: pm-gawk.info,  Node: Introduction,  Next: Quick Start,  Prev: Top,  Up: Top

1 Introduction
**************


GNU AWK (‘gawk’) 5.2, released in September 2022, introduced a new
_persistent memory_ feature that makes AWK scripting easier and
sometimes improves performance.  The new feature, called "pm-‘gawk’,"
can "remember" script-defined variables and functions across executions
and can pass variables and functions between unrelated scripts without
serializing/parsing text files--all with near-zero fuss.  pm-‘gawk’ does
_not_ require non-volatile memory hardware nor any other exotic
infrastructure; it runs on the ordinary conventional computers and
operating systems that we've all been using for decades.


The main ‘gawk’ documentation(1) covers the basics of the new
persistence feature.  This supplementary manual provides additional
detail, tutorial examples, and a peek under the hood of pm-‘gawk’.  If
you're familiar with ‘gawk’ and Unix-like environments, dive straight
in:

   • *note Quick Start:: hits the ground running with a few keystrokes.
   • *note Examples:: shows how pm-‘gawk’ streamlines typical AWK
     scripting.
   • *note Performance:: covers asymptotic efficiency, OS tuning, and
     more.
   • *note Data Integrity:: explains how to protect data from mishaps.
   • *note Acknowledgments:: thanks those who made pm-‘gawk’ happen.
   • *note Installation:: shows where obtain pm-‘gawk’.
   • *note Debugging:: explains how to handle suspected bugs.
   • *note History:: traces pm-‘gawk’'s persistence technology.


You can find the latest version of this manual, and also the "director's
cut," at the web site for the persistent memory allocator used in
pm-‘gawk’:
              <https://web.eecs.umich.edu/~tpkelly/pma/>


Two publications describe the persistent memory allocator and early
experiences with a pm-‘gawk’ prototype based on a fork of the official
‘gawk’ sources:
   • <https://queue.acm.org/detail.cfm?id=3534855>
   • 
     <http://nvmw.ucsd.edu/nvmw2022-program/nvmw2022-data/nvmw2022-paper35-final_version_your_extended_abstract.pdf>


Feel free to send me questions, suggestions, and experiences:

                <tpkelly@eecs.umich.edu>   (preferred)
                <tpkelly@cs.princeton.edu>
                <tpkelly@acm.org>

   ---------- Footnotes ----------

   (1) See <https://www.gnu.org/software/gawk/manual/>   and   ‘man
gawk’   and   ‘info gawk’.


File: pm-gawk.info,  Node: Quick Start,  Next: Examples,  Prev: Introduction,  Up: Top

2 Quick Start
*************

Here's pm-‘gawk’ in action at the ‘bash’ shell prompt (‘$’):
    $ truncate -s 4096000 heap.pma
    $ export GAWK_PERSIST_FILE=heap.pma
    $ gawk 'BEGIN{myvar = 47}'
    $ gawk 'BEGIN{myvar += 7; print myvar}'
    54                            # '7' => not pm-gawk, crash => bad build
First, ‘truncate’ creates an empty (all-zero-bytes) “heap file” where
pm-‘gawk’ will store script variables; its size is a multiple of the
system page size (4 KiB). Next, ‘export’ sets an environment variable
that enables pm-‘gawk’ to find the heap file; if ‘gawk’ does _not_ see
this envar, persistence is not activated.  The third command runs a
one-line AWK script that initializes variable ‘myvar’, which will reside
in the heap file and thereby outlive the interpreter process that
initialized it.  Finally, the fourth command invokes pm-‘gawk’ on a
_different_ one-line script that increments and prints ‘myvar’.  The
output shows that pm-‘gawk’ has indeed "remembered" ‘myvar’ across
executions of unrelated scripts.  To disable persistence until you want
it again, prevent ‘gawk’ from finding the heap file via ‘unset
GAWK_PERSIST_FILE’.  To permanently "forget" script variables, delete
the heap file.

   *Note Installation:: for two common problems and their fixes: If you
run the example above and pm-‘gawk’ crashes on the _second_ invocation,
it is likely that your pm-‘gawk’ was incorrectly built.  If the printed
output is ‘7’ instead of ‘54’, the ‘gawk’ executable in your search
‘$PATH’ lacks the persistence feature.

   Toggling persistence by ‘export’-ing and ‘unset’-ing "ambient" envars
requires care: Forgetting to ‘unset’ when you no longer want persistence
can cause surprises.  Fortunately, ‘bash’ allows you to pass envars more
deliberately, on a per-command basis:
        $ rm heap.pma                    # start fresh
        $ unset GAWK_PERSIST_FILE        # eliminate ambient envar
        $ truncate -s 4096000 heap.pma   # create new heap file

        $ GAWK_PERSIST_FILE=heap.pma gawk 'BEGIN{myvar = 47}'
        $ gawk 'BEGIN{myvar += 7; print myvar}'
        7
        $ GAWK_PERSIST_FILE=heap.pma gawk 'BEGIN{myvar += 7; print myvar}'
        54
The first ‘gawk’ invocation sees the special envar prepended on the
command line, so it activates pm-‘gawk’.  The second ‘gawk’ invocation,
however, does _not_ see the envar and therefore does not access the
script variable stored in the heap file.  The third ‘gawk’ invocation
does see the special envar and therefore uses the script variable from
the heap file.

   While sometimes less error prone than ambient envars, per-command
envar passing is verbose and shouty.  A shell alias saves keystrokes and
reduces visual clutter:
        $ alias pm='GAWK_PERSIST_FILE=heap.pma'
        $ pm gawk 'BEGIN{print ++myvar}'
        55
        $ pm gawk 'BEGIN{print ++myvar}'
        56


File: pm-gawk.info,  Node: Examples,  Next: Performance,  Prev: Quick Start,  Up: Top

3 Examples
**********

Our first example uses pm-‘gawk’ to streamline analysis of a prose
corpus, Mark Twain's ‘Tom Sawyer’ and ‘Huckleberry Finn’ from
<https://gutenberg.org/files/74/74-0.txt> and
<https://gutenberg.org/files/76/76-0.txt>.  We first convert
non-alphabetic characters to newlines (so each line has at most one
word) and convert to lowercase:
        $ tr -c a-zA-Z '\n' < 74-0.txt | tr A-Z a-z > sawyer.txt
        $ tr -c a-zA-Z '\n' < 76-0.txt | tr A-Z a-z > finn.txt

   It's easy to count word frequencies with AWK's associative arrays.
pm-‘gawk’ makes these arrays persistent, so we need not re-ingest the
entire corpus every time we ask a new question ("read once, analyze
happily ever after"):
        $ truncate -s 100M twain.pma
        $ export GAWK_PERSIST_FILE=twain.pma
        $ gawk '{ts[$1]++}' sawyer.txt                    # ingest
        $ gawk 'BEGIN{print ts["work"], ts["play"]}'      # query
        92 11
        $ gawk 'BEGIN{print ts["necktie"], ts["knife"]}'  # query
        2 27
The ‘truncate’ command above creates a heap file large enough to store
all of the data it must eventually contain, with plenty of room to
spare.  (As we'll see in *note Sparse Heap Files::, this isn't
wasteful.)  The ‘export’ command ensures that subsequent ‘gawk’
invocations activate pm-‘gawk’.  The first pm-‘gawk’ command stores ‘Tom
Sawyer’'s word frequencies in associative array ‘ts[]’.  Because this
array is persistent, subsequent pm-‘gawk’ commands can access it without
having to parse the input file again.

   Expanding our analysis to encompass a second book is easy.  Let's
populate a new associative array ‘hf[]’ with the word frequencies in
‘Huckleberry Finn’:
        $ gawk '{hf[$1]++}' finn.txt
Now we can freely intermix accesses to both books' data conveniently and
efficiently, without the overhead and coding fuss of repeated input
parsing:
        $ gawk 'BEGIN{print ts["river"], hf["river"]}'
        26 142

   pm-‘gawk’ feels like it has a read-eval-print loop, which invites
casual interactive conversations with data.  If we're curious what words
from ‘Finn’ are not in ‘Sawyer’, answers (including "flapdoodle,"
"yellocution," and "sockdolager") are a few keystrokes away:
        $ gawk 'BEGIN{for(w in hf) if (!(w in ts)) print w}'

   Rumors of Twain's death may be exaggerated.  If he publishes new
books in the future, it will be easy to incorporate them into our
analysis incrementally.  The performance benefits of incremental
processing for common AWK chores such as log file analysis are discussed
in <https://queue.acm.org/detail.cfm?id=3534855> and the companion paper
cited therein, and below in *note Performance::.

   Exercise: The "Markov" AWK script on page 79 of Kernighan & Pike's
‘The Practice of Programming’ generates random text reminiscent of a
given corpus using a simple statistical modeling technique.  This script
consists of a "learning" or "training" phase followed by an
output-generation phase.  Use pm-‘gawk’ to de-couple the two phases and
to allow the statistical model to incrementally ingest additions to the
input corpus.

   Our second example considers another domain that plays to AWK's
strengths, data analysis.  For simplicity we'll create two small input
files of numeric data.
        $ printf '1\n2\n3\n4\n5\n' > A.dat
        $ printf '5\n6\n7\n8\n9\n' > B.dat
A conventional _non_-persistent AWK script can compute basic summary
statistics:
        $ cat summary_conventional.awk
            1 == NR  { min = max = $1 }
            min > $1 { min  = $1 }
            max < $1 { max  = $1 }
                     { sum += $1 }
            END { print "min: " min " max: " max " mean: " sum/NR }

        $ gawk -f summary_conventional.awk A.dat B.dat
        min: 1 max: 9 mean: 5

   To use pm-‘gawk’ for the same purpose, we first create a heap file
for our AWK script variables and tell pm-‘gawk’ where to find it via the
usual environment variable:
        $ truncate -s 10M stats.pma
        $ export GAWK_PERSIST_FILE=stats.pma
pm-‘gawk’ requires changing the above script to ensure that ‘min’ and
‘max’ are initialized exactly once, when the heap file is first used,
and _not_ every time the script runs.  Furthermore, whereas
script-defined variables such as ‘min’ retain their values across
pm-‘gawk’ executions, built-in AWK variables such as ‘NR’ are reset to
zero every time pm-‘gawk’ runs, so we can't use them in the same way.
Here's a modified script for pm-‘gawk’:
        $ cat summary_persistent.awk
            ! init   { min = max = $1; init = 1 }
            min > $1 { min = $1 }
            max < $1 { max = $1 }
                     { sum += $1; ++n }
            END { print "min: " min " max: " max " mean: " sum/n }
Note the different pattern on the first line and the introduction of ‘n’
to supplant ‘NR’.  When used with pm-‘gawk’, this new initialization
logic supports the same kind of cumulative processing that we saw in the
text-analysis scenario.  For example, we can ingest our input files
separately:
        $ gawk -f summary_persistent.awk A.dat
        min: 1 max: 5 mean: 3

        $ gawk -f summary_persistent.awk B.dat
        min: 1 max: 9 mean: 5
As expected, after the second pm-‘gawk’ invocation consumes the second
input file, the output matches that of the non-persistent script that
read both files at once.

   Exercise: Amend the AWK scripts above to compute the median and
mode(s) using both conventional ‘gawk’ and pm-‘gawk’.  (The median is
the number in the middle of a sorted list; if the length of the list is
even, average the two numbers at the middle.  The modes are the values
that occur most frequently.)

   Our final examples show that pm-‘gawk’ allows us to bundle both
script-defined data and also user-defined _functions_ in a persistent
heap that we can pass freely between unrelated AWK scripts.

   The following shell transcript repeatedly invokes pm-‘gawk’ to create
and then employ a user-defined function.  These separate invocations
involve several different AWK scripts that communicate via the heap
file.  Each invocation can add user-defined functions and add or remove
data from the heap that subsequent invocations will access.
        $ truncate -s 10M funcs.pma
        $ export GAWK_PERSIST_FILE=funcs.pma
        $ gawk 'function count(A,t) {for(i in A)t++; return t+0}'
        $ gawk 'BEGIN { a["x"] = 4; a["y"] = 5; a["z"] = 6 }'
        $ gawk 'BEGIN { print count(a) }'
        3
        $ gawk 'BEGIN { delete a["x"] }'
        $ gawk 'BEGIN { print count(a) }'
        2
        $ gawk 'BEGIN { delete a }'
        $ gawk 'BEGIN { print count(a) }'
        0
        $ gawk 'BEGIN { for (i=0; i<47; i++) a[i]=i }'
        $ gawk 'BEGIN { print count(a) }'
        47
The first pm-‘gawk’ command creates user-defined function ‘count()’,
which returns the number of entries in a given associative array; note
that variable ‘t’ is local to ‘count()’, not global.  The next pm-‘gawk’
command populates a persistent associative array with three entries; not
surprisingly, the ‘count()’ call in the following pm-‘gawk’ command
finds these three entries.  The next two pm-‘gawk’ commands respectively
delete an array entry and print the reduced count, 2.  The two commands
after that delete the entire array and print a count of zero.  Finally,
the last two pm-‘gawk’ commands populate the array with 47 entries and
count them.

   The following shell script invokes pm-‘gawk’ repeatedly to create a
collection of user-defined functions that perform basic operations on
quadratic polynomials: evaluation at a given point, computing the
discriminant, and using the quadratic formula to find the roots.  It
then factors x^2 + x - 12 into (x - 3)(x + 4).
        #!/bin/sh
        rm -f                    poly.pma
        truncate -s 10M          poly.pma
        export GAWK_PERSIST_FILE=poly.pma
        gawk 'function q(x) { return a*x^2 + b*x + c }'
        gawk 'function p(x) { return "q(" x ") = " q(x) }'
        gawk 'BEGIN { print p(2) }'           # evaluate & print
        gawk 'BEGIN{ a = 1; b = 1; c = -12 }' # new coefficients
        gawk 'BEGIN { print p(2) }'           # eval/print again
        gawk 'function d(s) { return s * sqrt(b^2 - 4*a*c)}'
        gawk 'BEGIN{ print "discriminant (must be >=0): " d(1)}'
        gawk 'function r(s) { return (-b + d(s))/(2*a)}'
        gawk 'BEGIN{ print "root: " r( 1) "   " p(r( 1)) }'
        gawk 'BEGIN{ print "root: " r(-1) "   " p(r(-1)) }'
        gawk 'function abs(n) { return n >= 0 ? n : -n }'
        gawk 'function sgn(x) { return x >= 0 ? "- " : "+ " } '
        gawk 'function f(s) { return "(x " sgn(r(s)) abs(r(s))}'
        gawk 'BEGIN{ print "factor: " f( 1) ")" }'
        gawk 'BEGIN{ print "factor: " f(-1) ")" }'
        rm -f poly.pma


File: pm-gawk.info,  Node: Performance,  Next: Data Integrity,  Prev: Examples,  Up: Top

4 Performance
*************

This chapter explains several performance advantages that result from
the implementation of persistent memory in pm-‘gawk’, shows how tuning
the underlying operating system sometimes improves performance, and
presents experimental performance measurements.  To make the discussion
concrete, we use examples from a GNU/Linux system--GNU utilities atop
the Linux OS--but the principles apply to other modern operating
systems.

* Menu:

* Constant-Time Array Access::
* Virtual Memory and Big Data::
* Sparse Heap Files::
* Persistence versus Durability::
* Experiments::
* Results::


File: pm-gawk.info,  Node: Constant-Time Array Access,  Next: Virtual Memory and Big Data,  Up: Performance

4.1 Constant-Time Array Access
==============================

pm-‘gawk’ preserves the efficiency of data access when data structures
are created by one process and later re-used by a different process.

   Consider the associative arrays used to analyze Mark Twain's books in
*note Examples::.  We created arrays ‘ts[]’ and ‘hf[]’ by reading files
‘sawyer.txt’ and ‘finn.txt’.  If N denotes the total volume of data in
these files, building the associative arrays typically requires time
proportional to N, or "O(N) expected time" in the lingo of asymptotic
analysis.  If W is the number of unique words in the input files, the
size of the associative arrays will be proportional to W, or O(W).
Accessing individual array elements requires only _constant_ or O(1)
expected time, not O(N) or O(W) time, because ‘gawk’ implements arrays
as hash tables.

   The performance advantage of pm-‘gawk’ arises when different
processes create and access associative arrays.  Accessing an element of
a persistent array created by a previous pm-‘gawk’ process, as we did
earlier in BEGIN{print ts["river"], hf["river"]}, still requires only
O(1) time, which is asymptotically far superior to the alternatives.
Naïvely reconstructing arrays by re-ingesting all raw inputs in every
‘gawk’ process that accesses the arrays would of course require O(N)
time--a profligate cost if the text corpus is large.  Dumping arrays to
files and re-loading them as needed would reduce the preparation time
for access to O(W). That can be a substantial improvement in practice; N
is roughly 19 times larger than W in our Twain corpus.  Nonetheless O(W)
remains far slower than pm-‘gawk’'s O(1).  As we'll see in *note
Results::, the difference is not merely theoretical.

   The persistent memory implementation beneath pm-‘gawk’ enables it to
avoid work proportional to N or W when accessing an element of a
persistent associative array.  Under the hood, pm-‘gawk’ stores
script-defined AWK variables such as associative arrays in a persistent
heap laid out in a memory-mapped file (the heap file).  When an AWK
script accesses an element of an associative array, pm-‘gawk’ performs a
lookup on the corresponding hash table, which in turn accesses memory on
the persistent heap.  Modern operating systems implement memory-mapped
files in such a way that these memory accesses trigger the bare minimum
of data movement required: Only those parts of the heap file containing
needed data are "paged in" to the memory of the pm-‘gawk’ process.  In
the worst case, the heap file is not in the file system's in-memory
cache, so the required pages must be faulted into memory from storage.
Our asymptotic analysis of efficiency applies regardless of whether the
heap file is cached or not.  The entire heap file is _not_ accessed
merely to access an element of a persistent associative array.

   Persistent memory thus enables pm-‘gawk’ to offer the flexibility of
de-coupling data ingestion from analytic queries without the fuss and
overhead of serializing and loading data structures and without
sacrificing constant-time access to the associative arrays that make AWK
scripting convenient and productive.


File: pm-gawk.info,  Node: Virtual Memory and Big Data,  Next: Sparse Heap Files,  Prev: Constant-Time Array Access,  Up: Performance

4.2 Virtual Memory and Big Data
===============================

Small data sets seldom spoil the delights of AWK by causing performance
troubles, with or without persistence.  As the size of the ‘gawk’
interpreter's internal data structures approaches the capacity of
physical memory, however, acceptable performance requires understanding
modern operating systems and sometimes tuning them.  Fortunately
pm-‘gawk’ offers new degrees of control for performance-conscious users
tackling large data sets.  A terse mnemonic captures the basic
principle: Precluding paging promotes peak performance and prevents
perplexity.

   Modern operating systems feature “virtual memory” that strives to
appear both larger than installed DRAM (which is small) and faster than
installed storage devices (which are slow).  As a program's memory
footprint approaches the capacity of DRAM, the virtual memory system
transparently “pages” (moves) the program's data between DRAM and a
“swap area” on a storage device.  Paging can degrade performance mildly
or severely, depending on the program's memory access patterns.  Random
accesses to large data structures can trigger excessive paging and
dramatic slowdown.  Unfortunately, the hash tables beneath AWK's
signature associative arrays inherently require random memory accesses,
so large associative arrays can be problematic.

   Persistence changes the rules in our favor: The OS pages data to
pm-‘gawk’'s _heap file_ instead of the swap area.  This won't help
performance much if the heap file resides in a conventional
storage-backed file system.  On Unix-like systems, however, we may place
the heap file in a DRAM-backed file system such as ‘/dev/shm/’, which
entirely prevents paging to slow storage devices.  Temporarily placing
the heap file in such a file system is a reasonable expedient, with two
caveats: First, keep in mind that DRAM-backed file systems perish when
the machine reboots or crashes, so you must copy the heap file to a
conventional storage-backed file system when your computation is done.
Second, pm-‘gawk’'s memory footprint can't exceed available DRAM if you
place the heap file in a DRAM-backed file system.

   Tuning OS paging parameters may improve performance if you decide to
run pm-‘gawk’ with a heap file in a conventional storage-backed file
system.  Some OSes have unhelpful default habits regarding modified
("dirty") memory backed by files.  For example, the OS may write dirty
memory pages to the heap file periodically and/or when the OS believes
that "too much" memory is dirty.  Such "eager" writeback can degrade
performance noticeably and brings no benefit to pm-‘gawk’.  Fortunately
some OSes allow paging defaults to be over-ridden so that writeback is
"lazy" rather than eager.  For Linux see the discussion of the ‘dirty_*’
parameters at
<https://www.kernel.org/doc/html/latest/admin-guide/sysctl/vm.html>.
Changing these parameters can prevent wasteful eager paging:(1)
        $ echo 100    | sudo tee /proc/sys/vm/dirty_background_ratio
        $ echo 100    | sudo tee /proc/sys/vm/dirty_ratio
        $ echo 300000 | sudo tee /proc/sys/vm/dirty_expire_centisecs
        $ echo 50000  | sudo tee /proc/sys/vm/dirty_writeback_centisecs
Tuning paging parameters can help non-persistent ‘gawk’ as well as
pm-‘gawk’.
[*Disclaimer*: OS tuning is an occult art, and your mileage may vary.]

   ---------- Footnotes ----------

   (1) The ‘tee’ rigmarole is explained at
<https://askubuntu.com/questions/1098059/which-is-the-right-way-to-drop-caches-in-lubuntu>.


File: pm-gawk.info,  Node: Sparse Heap Files,  Next: Persistence versus Durability,  Prev: Virtual Memory and Big Data,  Up: Performance

4.3 Sparse Heap Files
=====================

To be frugal with storage resources, pm-‘gawk’'s heap file should be
created as a “sparse file”: a file whose logical size is larger than its
storage resource footprint.  Modern file systems support sparse files,
which are easy to create using the ‘truncate’ tool shown in our
examples.

   Let's first create a conventional _non_-sparse file using ‘echo’:
        $ echo hi > dense
        $ ls -l dense
        -rw-rw-r--. 1 me me 3 Aug  5 23:08 dense
        $ du -h dense
        4.0K    dense
The ‘ls’ utility reports that file ‘dense’ is three bytes long (two for
the letters in "hi" plus one for the newline).  The ‘du’ utility reports
that this file consumes 4 KiB of storage--one block of disk, as small as
a non-sparse file's storage footprint can be.  Now let's use ‘truncate’
to create a logically enormous sparse file and check its physical size:
        $ truncate -s 1T sparse
        $ ls -l sparse
        -rw-rw-r--. 1 me me 1099511627776 Aug  5 22:33 sparse
        $ du -h sparse
        0       sparse
Whereas ‘ls’ reports the logical file size that we expect (one TiB or 2
raised to the power 40 bytes), ‘du’ reveals that the file consumes
_zero_ storage.  The file system will allocate physical storage beneath
this file as data are written to it; reading unwritten regions yields
zeros.

   The "pay as you go" storage cost of sparse files offers both
convenience and control for pm-‘gawk’ users.  If your file system
supports sparse files, go ahead and create lavishly capacious heap files
for pm-‘gawk’.  Their logical size costs nothing and persistent memory
allocation within pm-‘gawk’ won't fail until physical storage resources
beneath the file system are exhausted.  But if instead you want to
_prevent_ a heap file from consuming too much storage, simply set its
initial size to whatever bound you wish to enforce; it won't eat more
disk than that.  Copying sparse files with GNU ‘cp’ creates sparse
copies by default.

   To maximize storage frugality we sometimes want to "re-sparsify" heap
files cluttered with de-allocated memory that pm-‘gawk’ no longer needs.
A stand-alone utility, ‘pma_sam’, is provided for this purpose at the
‘pma’ web site.

   File-system encryption can preclude sparse files: If the plaintext of
a byte offset range within a file is all zero bytes, the corresponding
ciphertext mustn't be all zeros!  Encrypting at the storage layer
instead of the file system may offer acceptable security while still
permitting sparse files.

   Sometimes you want a dense heap file backed by pre-allocated storage,
e.g., to ensure that pm-‘gawk’'s internal memory allocation will succeed
until the persistent heap fills the entire file.  The ‘fallocate’
utility does the trick:
        $ fallocate -l 1M mibi
        $ ls -l mibi
        -rw-rw-r--. 1 me me 1048576 Aug  5 23:18 mibi
        $ du -h mibi
        1.0M    mibi       # We get our MiB, both logically & physically.


File: pm-gawk.info,  Node: Persistence versus Durability,  Next: Experiments,  Prev: Sparse Heap Files,  Up: Performance

4.4 Persistence versus Durability
=================================

Arguably the most important general guideline for good performance in
computer systems is, "pay only for what you need."(1)  To apply this
maxim to pm-‘gawk’ we must distinguish two concepts that are frequently
conflated: persistence and durability.(2)  (A third logically distinct
concept is the subject of *note Data Integrity::.)

   “Persistent” data outlive the processes that access them, but don't
necessarily last forever.  For example, as explained in ‘man
mq_overview’, message queues are persistent because they exist until the
system shuts down.  “Durable” data reside on a physical medium that
retains its contents even without continuously supplied power.  For
example, hard disk drives and solid state drives store durable data.
Confusion arises because persistence and durability are often
correlated: Data in ordinary file systems backed by HDDs or SSDs are
typically both persistent and durable.  Familiarity with ‘fsync()’ and
‘msync()’ might lead us to believe that durability is a subset of
persistence, but in fact the two characteristics are orthogonal: Data in
the swap area are durable but not persistent; data in DRAM-backed file
systems such as ‘/dev/shm/’ are persistent but not durable.

   Durability often costs more than persistence, so
performance-conscious pm-‘gawk’ users pay the added premium for
durability only when persistence alone is not sufficient.  Two ways to
avoid unwanted durability overheads were discussed in *note Virtual
Memory and Big Data::: Place pm-‘gawk’'s heap file in a DRAM-backed file
system, or disable eager writeback to the heap file.  Expedients such as
these enable you to remove durability overheads from the critical path
of multi-stage data analyses even when you want heap files to eventually
be durable: Allow pm-‘gawk’ to run at full speed with persistence alone;
force the heap file to durability (using the ‘cp’ and ‘sync’ utilities
as necessary) after output has been emitted to the next stage of the
analysis and the pm-‘gawk’ process using the heap has terminated.

   Experimenting with synthetic data builds intuition for how
persistence and durability affect performance.  You can write a little
AWK or C program to generate a stream of random text, or just cobble
together a quick and dirty generator on the command line:
        $ openssl rand --base64 1000000 | tr -c a-zA-Z '\n' > random.dat
Varying the size of random inputs can, for example, find where
performance "falls off the cliff" as pm-‘gawk’'s memory footprint
exceeds the capacity of DRAM and paging begins.

   Experiments require careful methodology, especially when the heap
file is in a storage-backed file system.  Overlooking the file system's
DRAM cache can easily misguide interpretation of results and foil
repeatability.  Fortunately Linux allows us to invalidate the file
system cache and thus mimic a "cold start" condition resembling the
immediate aftermath of a machine reboot.  Accesses to ordinary files on
durable storage will then be served from the storage devices, not from
cache.  Read about ‘sync’ and ‘/proc/sys/vm/drop_caches’ at
<https://www.kernel.org/doc/html/latest/admin-guide/sysctl/vm.html>.

   ---------- Footnotes ----------

   (1) Remarkably, this guideline is widely ignored in surprising ways.
Certain well-known textbook algorithms continue to grind away
fruitlessly long after having computed all of their output.
See <https://queue.acm.org/detail.cfm?id=3424304>.

   (2) In recent years the term "persistent memory" has sometimes been
used to denote novel byte-addressable non-volatile memory hardware--an
unfortunate practice that contradicts sensible long-standing convention
and causes needless confusion.  NVM provides durability.  Persistent
memory is a software abstraction that doesn't require NVM. See
<https://queue.acm.org/detail.cfm?id=3358957>.


File: pm-gawk.info,  Node: Experiments,  Next: Results,  Prev: Persistence versus Durability,  Up: Performance

4.5 Experiments
===============

The C-shell (‘csh’) script listed below illustrates concepts and
implements tips presented in this chapter.  It produced the results
discussed in *note Results:: in roughly 20 minutes on an aging laptop.
To reproduce my experiments, cut/paste the listing below into a file;
take care that no lines are duplicated or omitted.

   The script measures the performance of four different ways to support
word frequency queries over a text corpus: The naïve approach of reading
the corpus into an associative array for every query; manually dumping a
text representation of the word-frequency table and manually loading it
prior to a query; using ‘gawk’'s ‘rwarray’ extension to dump and load an
associative array; and using pm-‘gawk’ to maintain a persistent
associative array.

   Comments at the top explain prerequisites.  Lines 8-10 set input
parameters: the directory where tests are run and where files including
the heap file are held, the off-the-shelf timer used to measure run
times and other performance characteristics such as peak memory usage,
and the size of the input.  The default input size results in pm-‘gawk’
memory footprints under 3 GiB, which is large enough for interesting
results and small enough to fit in DRAM and avoid paging on today's
computers.  Lines 13-14 define a homebrew timer.

   Two sections of the script are relevant if the default run directory
is changed from ‘/dev/shm/’ to a directory in a conventional
storage-backed file system: Lines 15-17 define the mechanism for
clearing file data cached in DRAM; lines 23-30 set Linux kernel
parameters to discourage eager paging.

   Lines 37-70 spit out, compile, and run a little C program to generate
a random text corpus.  This program is fast, flexible, and
deterministic, generating the same random output given the same
parameters.

   Lines 71-100 run the four different AWK approaches on the same random
input, reporting separately the time to build and to query the
associative array containing word frequencies.


#!/bin/csh -f
# Set PMG envar to path of pm-gawk executable and AWKLIBPATH                        #   2
#    to find rwarray.so                                                             #   3
# Requires "sudo" to work; consider this for /etc/sudoers file:                     #   4
#    Defaults:youruserid    !authenticate                                           #   5
echo 'begin:      ' `date` `date +%s`                                               #   6
unsetenv GAWK_PERSIST_FILE  # disable persistence until wanted                      #   7
set dir = '/dev/shm'        # where heap file et al. will live                      #   8
set tmr = '/usr/bin/time'   # can also use shell built-in "time"                    #   9
set isz = 1073741824        # input size; 1 GiB                                     #  10
# set isz = 100000000       # small input for quick testing                         #  11
cd $dir   # tick/tock/tyme below are homebrew timer, good within ~2ms               #  12
alias tick 'set t1 = `date +%s.%N`' ; alias tock 'set t2 = `date +%s.%N`'           #  13
alias tyme '$PMG -v t1=$t1 -v t2=$t2 "BEGIN{print t2-t1}"'                          #  14
alias tsync 'tick ; sync ; tock ; echo "sync time:  " `tyme`'                       #  15
alias drop_caches 'echo 3 | sudo tee /proc/sys/vm/drop_caches'                      #  16
alias snd 'tsync; drop_caches'                                                      #  17
echo "pm-gawk:     $PMG" ; echo 'std gawk:   ' `which gawk`                         #  18
echo "run dir:     $dir" ; echo 'pwd:        ' `pwd`                                #  19
echo 'dir content:'      ; ls -l $dir |& $PMG '{print "             " $0}'          #  20
echo 'timer:      ' $tmr ; echo 'AWKLIBPATH: ' $AWKLIBPATH                          #  21
echo 'OS params:' ; set vm = '/proc/sys/vm/dirty'                                   #  22
sudo sh -c "echo 100     > ${vm}_background_ratio"     # restore these              #  23
sudo sh -c "echo 100     > ${vm}_ratio"                # paging params              #  24
sudo sh -c "echo 1080000 > ${vm}_expire_centisecs"     # to defaults                #  25
sudo sh -c "echo 1080000 > ${vm}_writeback_centisecs"  # if necessary               #  26
foreach d ( ${vm}_background_ratio  ${vm}_ratio \                                   #  27
            ${vm}_expire_centisecs  ${vm}_writeback_centisecs )                     #  28
    printf "             %-38s %7d\n" $d `cat $d`                                   #  29
end                                                                                 #  30
tick ; tock ; echo 'timr ovrhd: ' `tyme` 's (around 2ms for TK)'                    #  31
tick ; $PMG 'BEGIN{print "pm-gawk?     yes"}'                                       #  32
tock ; echo 'pmg ovrhd:  ' `tyme` 's (around 4-5 ms for TK)'                        #  33
set inp = 'input.dat'                                                               #  34
echo 'input size  ' $isz                                                            #  35
echo "input file:  $inp"                                                            #  36
set rg = rgen  # spit out and compile C program to generate random inputs           #  37
rm -f $inp  $rg.c $rg                                                               #  38
cat <<EOF > $rg.c                                                                   #  39
// generate N random words, one per line, no blank lines                            #  40
// charset is e.g. 'abcdefg@' where '@' becomes newline                             #  41
#include <stdio.h>                                                                  #  42
#include <stdlib.h>                                                                 #  43
#include <string.h>                                                                 #  44
#define RCH     c = a[rand() % L];                                                  #  45
#define PICK    do { RCH } while (0)                                                #  46
#define PICKCH  do { RCH } while (c == '@')                                         #  47
#define FP(...) fprintf(stderr, __VA_ARGS__)                                        #  48
int main(int argc, char *argv[]) {                                                  #  49
  if (4 != argc) {                                                                  #  50
    FP("usage:  %s  charset  N  seed\n",                                            #  51
                    argv[0]);   return 1; }                                         #  52
  char c, *a =      argv[1];    size_t L = strlen(a);                               #  53
  long int N = atol(argv[2]);                                                       #  54
  srand(       atol(argv[3]));                                                      #  55
  if (2 > N) { FP("N == %ld < 2\n", N); return 2; }                                 #  56
  PICKCH;                                                                           #  57
  for (;;) {                                                                        #  58
    if (2 == N) { PICKCH; putchar(c); putchar('\n'); break; }                       #  59
    if ('@' == c) { putchar('\n'); PICKCH; }                                        #  60
    else          { putchar( c  ); PICK;   }                                        #  61
    if (0 >= --N) break;                                                            #  62
  }                                                                                 #  63
}                                                                                   #  64
EOF                                                                                 #  65
gcc -std=c11 -Wall -Wextra -O3 -o $rg $rg.c                                         #  66
set t = '@@@@@@@' ; set c = "abcdefghijklmnopqrstuvwxyz$t$t$t$t$t$t"                #  67
tick ; ./$rg "$c" $isz 47 > $inp ; tock ; echo 'gen time:   ' `tyme`                #  68
echo "input file:  $inp"                                                            #  69
echo 'input wc:   ' `wc < $inp` ; echo 'input uniq: ' `sort -u $inp | wc`           #  70
snd ############################################################################    #  71
tick ; $tmr $PMG '{n[$1]++}END{print "output: " n["foo"]}' $inp                     #  72
tock ; echo 'T naive O(N):          ' `tyme` ; echo ''                              #  73
rm -f rwa                                                                           #  74
snd ############################################################################    #  75
echo ''                                                                             #  76
tick ; $tmr $PMG -l rwarray '{n[$1]++}END{print "writea",writea("rwa",n)}' $inp     #  77
tock ; echo 'T rwarray build O(N):  ' `tyme` ; echo ''                              #  78
snd  # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #    #  79
tick ; $tmr $PMG -l rwarray 'BEGIN{print "reada",reada("rwa",n); \                  #  80
                                   print "output: " n["foo"]}'                      #  81
tock ; echo 'T rwarray query O(W):   ' `tyme` ; echo ''                             #  82
rm -f ft                                                                            #  83
snd ############################################################################    #  84
tick ; $tmr $PMG '{n[$1]++}END{for(w in n)print n[w], w}' $inp > ft                 #  85
tock ; echo 'T freqtbl build O(N):  ' `tyme` ; echo ''                              #  86
snd  # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #    #  87
tick ; $tmr $PMG '{n[$2] = $1}END{print "output: " n["foo"]}' ft                    #  88
tock ; echo 'T freqtbl query O(W):   ' `tyme` ; echo ''                             #  89
rm -f heap.pma                                                                      #  90
snd ############################################################################    #  91
truncate -s 3G heap.pma  # enlarge if needed                                        #  92
setenv GAWK_PERSIST_FILE heap.pma                                                   #  93
tick ; $tmr $PMG '{n[$1]++}' $inp                                                   #  94
tock ; echo 'T pm-gawk build O(N):  ' `tyme` ; echo ''                              #  95
snd  # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #    #  96
tick ; $tmr $PMG 'BEGIN{print "output: " n["foo"]}'                                 #  97
tock ; echo 'T pm-gawk query O(1):    ' `tyme` ; echo ''                            #  98
unsetenv GAWK_PERSIST_FILE                                                          #  99
snd ############################################################################    # 100
echo 'Note:  all output lines above should be identical' ; echo ''                  # 101
echo 'dir content:' ; ls -l $dir |& $PMG '{print "              " $0}'              # 102
echo '' ; echo 'storage footprints:'                                                # 103
foreach f ( rwa ft heap.pma )  # compression is very slow, so we comment it out     # 104
    echo "    $f " `du -BK $dir/$f` # `xz --best < $dir/$f | wc -c` 'bytes xz'      # 105
end                                                                                 # 106
echo '' ; echo 'end:        ' `date` `date +%s` ; echo ''                           # 107


File: pm-gawk.info,  Node: Results,  Prev: Experiments,  Up: Performance

4.6 Results
===========

Running the script of *note Experiments:: with default parameters on an
aging laptop yielded the results summarized in the table below.  More
extensive experiments, not reported here, yield qualitatively similar
results.  Keep in mind that performance measurements are often sensitive
to seemingly irrelevant factors.  For example, the program that runs
first may have the advantage of a cooler CPU; later contestants may
start with a hot CPU and consequent clock throttling by a modern
processor's thermal regulation apparatus.  Very generally, performance
measurement is a notoriously tricky business.  For scripting, whose main
motive is convenience rather than speed, the proper role for performance
measurements is to qualitatively test hypotheses such as those that
follow from asymptotic analyses and to provide a rough idea of when
various approaches are practical.


                            run time      peak memory    intermediate
        AWK script            (sec)      footprint (K)    storage (K)

        naive         O(N)   242.132       2,081,360           n/a
        rwarray build O(N)   250.288       2,846,868         156,832
        rwarray query O(W)    11.653       2,081,444
        freqtbl build O(N)   288.408       2,400,120          69,112
        freqtbl query O(W)    11.624       2,336,616
        pm-gawk build O(N)   251.946       2,079,520       2,076,608
        pm-gawk query O(1)     0.026           3,252


   The results are consistent with the asymptotic analysis of *note
Constant-Time Array Access::.  All four approaches require roughly four
minutes to read the synthetic input data.  The naïve approach must do
this every time it performs a query, but the other three build an
associative array to support queries and separately serve such queries.
The ‘freqtbl’ and ‘rwarray’ approaches build an associative array of
word frequencies, serialize it to an intermediate file, and then read
the entire intermediate file prior to serving queries; the former does
this manually and the latter uses a ‘gawk’ extension.  Both can serve
queries in roughly ten seconds, not four minutes.  As we'd expect from
the asymptotic analysis, performing work proportional to the number of
words is preferable to work proportional to the size of the raw input
corpus: O(W) time is faster than O(N). And as we'd expect, pm-‘gawk’'s
constant-time queries are faster still, by roughly two orders of
magnitude.  For the computations considered here, pm-‘gawk’ makes the
difference between blink-of-an-eye interactive queries and response
times long enough for the user's mind to wander.

   Whereas ‘freqtbl’ and ‘rwarray’ reconstruct an associative array
prior to accessing an individual element, pm-‘gawk’ stores a ready-made
associative array in persistent memory.  That's why its intermediate
file (the heap file) is much larger than the other two intermediate
files, why the heap file is nearly as large as pm-‘gawk’'s peak memory
footprint while building the persistent array, and why its memory
footprint is very small while serving a query that accesses a single
array element.  The upside of the large heap file is O(1) access instead
of O(W)--a classic time-space tradeoff.  If storage is a scarce
resource, all three intermediate files can be compressed, ‘freqtbl’ by a
factor of roughly 2.7x, ‘rwarray’ by roughly 5.6x, and pm-‘gawk’ by
roughly 11x using ‘xz’.  Compression is CPU-intensive and slow, another
time-space tradeoff.


File: pm-gawk.info,  Node: Data Integrity,  Next: Acknowledgments,  Prev: Performance,  Up: Top

5 Data Integrity
****************

Mishaps including power outages, OS kernel panics, scripting bugs, and
command-line typos can harm your data, but precautions can mitigate
these risks.  In scripting scenarios it usually suffices to create safe
backups of important files at appropriate times.  As simple as this
sounds, care is needed to achieve genuine protection and to reduce the
costs of backups.  Here's a prudent yet frugal way to back up a heap
file between uses:
        $ backup_base=heap_bk_`date +%s`
        $ cp --reflink=always heap.pma $backup_base.pma
        $ chmod a-w $backup_base.pma
        $ sync
        $ touch $backup_base.done
        $ chmod a-w $backup_base.done
        $ sync
        $ ls -l heap*
        -rw-rw-r--. 1 me me 4096000 Aug  6 15:53 heap.pma
        -r--r--r--. 1 me me       0 Aug  6 16:16 heap_bk_1659827771.done
        -r--r--r--. 1 me me 4096000 Aug  6 16:16 heap_bk_1659827771.pma
Timestamps in backup filenames make it easy to find the most recent copy
if the heap file is damaged, even if last-mod metadata are inadvertently
altered.

   The ‘cp’ command's ‘--reflink’ option reduces both the storage
footprint of the copy and the time required to make it.  Just as sparse
files provide "pay as you go" storage footprints, reflink copying offers
"pay as you _change_" storage costs.(1)  A reflink copy shares storage
with the original file.  The file system ensures that subsequent changes
to either file don't affect the other.  Reflink copying is not available
on all file systems; XFS, BtrFS, and OCFS2 currently support it.(2)
Fortunately you can install, say, an XFS file system _inside an ordinary
file_ on some other file system, such as ‘ext4’.(3)

   After creating a backup copy of the heap file we use ‘sync’ to force
it down to durable media.  Otherwise the copy may reside only in
volatile DRAM memory--the file system's cache--where an OS crash or
power failure could corrupt it.(4)  After ‘sync’-ing the backup we
create and ‘sync’ a "success indicator" file with extension ‘.done’ to
address a nasty corner case: Power may fail _while_ a backup is being
copied from the primary heap file, leaving either file, or both, corrupt
on storage--a particularly worrisome possibility for jobs that run
unattended.  Upon reboot, each ‘.done’ file attests that the
corresponding backup succeeded, making it easy to identify the most
recent successful backup.

   Finally, if you're serious about tolerating failures you must "train
as you would fight" by testing your hardware/software stack against
realistic failures.  For realistic power-failure testing, see
<https://queue.acm.org/detail.cfm?id=3400902>.

   ---------- Footnotes ----------

   (1) The system call that implements reflink copying is described in
‘man ioctl_ficlone’.

   (2) The ‘--reflink’ option creates copies as sparse as the original.
If reflink copying is not available, ‘--sparse=always’ should be used.

   (3) See
<https://www.usenix.org/system/files/login/articles/login_winter19_08_kelly.pdf>.

   (4) On some OSes ‘sync’ provides very weak guarantees, but on Linux
‘sync’ returns only after all file system data are flushed down to
durable storage.  If your ‘sync’ is unreliable, write a little C program
that calls ‘fsync()’ to flush a file.  To be safe, also call ‘fsync()’
on every enclosing directory on the file's ‘realpath()’ up to the root.


File: pm-gawk.info,  Node: Acknowledgments,  Next: Installation,  Prev: Data Integrity,  Up: Top

6 Acknowledgments
*****************

Haris Volos, Zi Fan Tan, and Jianan Li developed a persistent ‘gawk’
prototype based on a fork of the ‘gawk’ source.  Advice from ‘gawk’
maintainer Arnold Robbins to me, which I forwarded to them, proved very
helpful.  Robbins moreover implemented, documented, and tested pm-‘gawk’
for the official version of ‘gawk’; along the way he suggested numerous
improvements for the ‘pma’ memory allocator beneath pm-‘gawk’.  Corinna
Vinschen suggested other improvements to ‘pma’ and tested pm-‘gawk’ on
Cygwin.  Nelson H. F. Beebe provided access to Solaris machines for
testing.  Robbins, Volos, Li, Tan, Jon Bentley, and Hans Boehm reviewed
drafts of this user manual and provided useful feedback.  Bentley
suggested the min/max/mean example in *note Examples::, and also the
exercise of making Kernighan & Pike's "Markov" script persistent.  Volos
provided and tested the advice on tuning OS parameters in *note Virtual
Memory and Big Data::.  Stan Park provided insights about virtual
memory, file systems, and utilities.  Antonio Giovanni Colombo
translated this manual into Italian; see file ‘doc/it/pm-gawk.texi’ in
the ‘gawk’ distribution tarball.


File: pm-gawk.info,  Node: Installation,  Next: Debugging,  Prev: Acknowledgments,  Up: Top

Appendix A Installation
***********************

Users may obtain pm-‘gawk’ via software package management systems or
via manual installation.  Each approach has pros and cons.

   *Packages*   Delegating the chore of installation to software package
management systems, such as those associated with major Linux
distributions including Ubuntu and Fedora, is easier--in theory.
Software packages on some Linux distributions, however, lag years behind
the latest software releases.  Therefore relatively new features might
be available only in "upstream" releases but not "downstream" packages.
For example, as of February 2025 the package-installed ‘gawk’ on Ubuntu
Linux is pre-5.2 and therefore lacks the persistence feature introduced
in ‘gawk’ 5.2, which was released way back in September 2022!  If the
first output line of ‘gawk --version’ shows 5.2 or later and "‘PMA’,"
you've got a pm-‘gawk’ that supports persistence; otherwise see "Manual
Install" below.

   Another problem with software installed by package managers is that
the software may have been compiled/built incorrectly.  For example, as
of February 2025 the package-installed ‘gawk’ 5.3.0 on Fedora 41 was
incorrectly created as a position-independent executable (PIE), despite
the official ‘gawk’ distribution's build system very deliberately and
explicitly disabling PIE. The result, noted in *note Quick Start::, is
that pm-‘gawk’ crashes the second time it is invoked.  The details of
the Fedora package bug, and remedies that are works in progress as of
early February 2025, are available at
            <https://bugzilla.redhat.com/show_bug.cgi?id=2341653>
The ‘file’ utility reveals whether ‘gawk’ was incorrectly built.  On
Fedora 41, for example:
                $ which gawk
                /usr/bin/gawk
                $ file /usr/bin/gawk
                /usr/bin/gawk: ELF 64-bit LSB pie ...
That little word "‘pie’" is likely to blame if your pm-‘gawk’ crashes on
the _second_ invocation.  By default, PIEs run with address-space layout
randomization (ASLR), which ‘gawk’ 5.2 thru the current 5.3.1 do not
tolerate.

   (Note: The persistent memory allocator that enables persistent-memory
‘gawk’--the ‘pma’ library--is perfectly compatible with PIE and ASLR.
The incompatibility of ‘gawk’ and ASLR arises from the interpreter's
internal data structures, which require that function pointers be
consistent across invocations.  ASLR introduces gratuitous
inconsistencies into these pointers.)

   While we're waiting for an elegant and permanent fix for the Fedora
41 PIE bug, we can use a klugey workaround: Run the pm-‘gawk’
interpreter via ‘setarch -R’, which disables ASLR despite the PIE.
Here's the first example from *note Quick Start::, first without the
fix, then with the fix:
    $ truncate -s 4096000 heap.pma
    $ export GAWK_PERSIST_FILE=heap.pma
    $ gawk 'BEGIN{myvar = 47}'
    $ gawk 'BEGIN{myvar += 7; print myvar}'
    Segmentation fault (core dumped)        # thanks to PIE

    $ rm -f heap.pma                        # discard heap from first try
    $ truncate -s 4096000 heap.pma          # start fresh
    $ setarch -R gawk 'BEGIN{myvar = 47}'
    $ setarch -R gawk 'BEGIN{myvar += 7; print myvar}'
    54                                                   # success
You can define a shell alias to expand the familiar and ergonomic ‘gawk’
into the cumbersome and verbose ‘setarch -R gawk’.

   Alternatively, it might be possible to disable ASLR system-wide by
using ‘sysctl’ to twiddle variables such as ‘kernel.randomize_va_space’.
I have not investigated such measures, which should be used with
caution.  Fully understand the implications of such a blunt system-wide
change before making it.

   It's reasonable to expect that, in the normal course of events,
correctly built pm-‘gawk’ will eventually find its way into the default
package-installed ‘gawk’ on major GNU/Linux distros.  Meanwhile, manual
installation is a fairly easy way to get a working pm-‘gawk’.

   As of version 5.3.2 of ‘gawk’, PIE vs. non-PIE builds are (or should
be) a non-issue.  ‘gawk’ itself arranges to disable ASLR at runtime when
using persistent memory.

     NOTE: Apparently there are some systems where regular processes are
     not allowed to disable ASLR. On such a system, the _second_ attempt
     to run ‘gawk’ with a persistent backing store will fail.  In such a
     case, you can try building ‘gawk’ yourself as a non-PIE executable,
     or use a different system.

   *Manual Install*   Manually compiling ‘gawk’ from source code in the
latest upstream release gives you the most recent stable version of
‘gawk’, built in accordance with with the maintainer's recipe, with no
meddling by intermediaries.  Therefore a manual install won't suffer
from bugs such as the PIE bug discussed above.  Download the latest
release here:
            <https://ftp.gnu.org/gnu/gawk/>
            <https://ftp.gnu.org/gnu/gawk/gawk-5.3.2.tar.xz>

   Finally, for the ultimate in bleeding-edge upstream freshness,
adventurous do-it-yourselfers can grab the ‘git’ master branch from
<http://git.savannah.gnu.org/cgit/gawk.git/snapshot/gawk-master.tar.gz>
Unpack the tarball, run ‘./bootstrap.sh’, ‘./configure’, ‘make’, and
‘make check’, then try some of the examples presented earlier.

   As of February 2025, pm-‘gawk’ is supported on most, but not all,
major Unix-like platforms.  The ‘gawk’ build system decides whether to
include support for persistence; see the ‘gawk’ documentation and the
file ‘m4/pma.m4’ in the ‘gawk’ distribution.


File: pm-gawk.info,  Node: Debugging,  Next: History,  Prev: Installation,  Up: Top

Appendix B Debugging
********************

For bugs unrelated to persistence, see the ‘gawk’ documentation, e.g.,
‘GAWK: Effective AWK Programming’, available at
<https://www.gnu.org/software/gawk/manual/>.

   If pm-‘gawk’ doesn't behave as you expect, first consider whether
you're using the heap file that you intend; using the wrong heap file is
a common mistake.  Other fertile sources of bugs for newcomers are the
fact that a ‘BEGIN’ block is executed every time pm-‘gawk’ runs, which
isn't always what you really want, and the fact that built-in AWK
variables such as ‘NR’ are always reset to zero every time the
interpreter runs.  See the discussion of initialization surrounding the
min/max/mean script in *note Examples::.

   If pm-‘gawk’ crashes on the _second_ invocation that uses a
particular heap file, see the discussion of PIE in *note Installation::.
If you suspect some other kind of persistence-related bug in pm-‘gawk’,
you can set an environment variable that will cause its persistent heap
module, ‘pma’, to emit more verbose error messages; for details see the
main ‘gawk’ documentation.

   Programmers: You can re-compile ‘gawk’ with assertions enabled, which
will trigger extensive integrity checks within ‘pma’.  Ensure that
‘pma.c’ is compiled _without_ the ‘-DNDEBUG’ flag when ‘make’ builds
‘gawk’.  Run the resulting executable on small inputs, because the
integrity checks can be very slow.  If assertions fail, that likely
indicates bugs somewhere in pm-‘gawk’.  Report such bugs to me (Terence
Kelly) and also following the procedures in the main ‘gawk’
documentation.  Specify what version of ‘gawk’ you're using, and try to
provide a small and simple script that reliably reproduces the bug.


File: pm-gawk.info,  Node: History,  Prev: Debugging,  Up: Top

Appendix C History
******************

The pm-‘gawk’ persistence feature is based on a new persistent memory
allocator, ‘pma’, whose design is described in
<https://queue.acm.org/detail.cfm?id=3534855>.  It is instructive to
trace the evolutionary paths that led to ‘pma’ and pm-‘gawk’.

   I wrote many AWK scripts during my dissertation research on Web
caching 25 years ago, most of which processed log files from Web servers
and Web caches.  Persistent ‘gawk’ would have made these scripts
smaller, faster, and easier to write, but at the time I was unable even
to imagine that pm-‘gawk’ is possible.  So I wrote a lot of bothersome,
inefficient code that manually dumped and re-loaded AWK script variables
to and from text files.  A decade would pass before my colleagues and I
began to connect the dots that make persistent scripting possible, and a
further decade would pass before pm-‘gawk’ came together.

   Circa 2011 while working at HP Labs I developed a fault-tolerant
distributed computing platform called "Ken," which contained a
persistent memory allocator that resembles a simplified ‘pma’: It
presented a ‘malloc()’-like C interface and it allocated memory from a
file-backed memory mapping.  Experience with Ken convinced me that the
software abstraction of persistent memory offers important attractions
compared with the alternatives for managing persistent data (e.g.,
relational databases and key-value stores).  Unfortunately, Ken's
allocator is so deeply intertwined with the rest of Ken that it's
essentially inseparable; to enjoy the benefits of Ken's persistent
memory, one must "buy in" to a larger and more complicated value
proposition.  Whatever its other virtues might be, Ken isn't ideal for
showcasing the benefits of persistent memory in isolation.

   Another entangled aspect of Ken was a crash-tolerance mechanism that,
in retrospect, can be viewed as a user-space implementation of
failure-atomic ‘msync()’.  The first post-Ken disentanglement effort
isolated the crash-tolerance mechanism and implemented it in the Linux
kernel, calling the result "failure-atomic ‘msync()’" (FAMS). FAMS
strengthens the semantics of ordinary standard ‘msync()’ by guaranteeing
that the durable state of a memory-mapped file always reflects the most
recent successful ‘msync()’ call, even in the presence of failures such
as power outages and OS or application crashes.  The original Linux
kernel FAMS prototype is described in a paper by Park et al. in EuroSys
2013.  My colleagues and I subsequently implemented FAMS in several
different ways including in file systems (FAST 2015) and user-space
libraries.  My most recent FAMS implementation, which leverages the
reflink copying feature described elsewhere in this manual, is now the
foundation of a new crash-tolerance feature in the venerable and
ubiquitous GNU ‘dbm’ (‘gdbm’) database
(<https://queue.acm.org/detail.cfm?id=3487353>).

   In recent years my attention has returned to the advantages of
persistent memory programming, which was a hot topic circa COVID thanks
to the fleeting commercial availability of byte-addressable non-volatile
memory hardware (Intel Optane, confusingly marketed as "persistent
memory").  The software abstraction of persistent memory and the
corresponding programming style, however, are perfectly compatible with
_conventional_ computers--machines with neither non-volatile memory nor
any other special hardware or software.  Several papers make this point,
e.g., <https://queue.acm.org/detail.cfm?id=3358957>

   In early 2022 I wrote a new stand-alone persistent memory allocator,
‘pma’, to make persistent memory programming easy on conventional
hardware.  The ‘pma’ interface is compatible with ‘malloc()’ and, unlike
Ken's allocator, ‘pma’ is not coupled to a particular crash-tolerance
mechanism.  Using ‘pma’ is easy and fun.

   Ken had been integrated into prototype forks of both the V8
JavaScript interpreter and a Scheme interpreter, so it was natural to
consider whether ‘pma’ might similarly enhance an interpreted scripting
language.  GNU AWK was a natural choice because the source code is
orderly and because ‘gawk’ has a single primary maintainer with an open
mind regarding new features.

   Jianan Li, Zi Fan Tan, Haris Volos, and I began considering
persistence for ‘gawk’ in late 2021.  While I was writing ‘pma’, they
prototyped pm-‘gawk’ in a fork of the ‘gawk’ source.  Experience with
the prototype confirmed the expected convenience and efficiency benefits
of pm-‘gawk’, and by spring 2022 Arnold Robbins was implementing
persistence in the official version of ‘gawk’.  The persistence feature
in official ‘gawk’ differs slightly from the prototype: The former uses
an environment variable to pass the heap file name to the interpreter
whereas the latter uses a mandatory command-line option.  In many
respects, however, the two implementations are similar.  A description
of the prototype, including performance measurements, is available at
<http://nvmw.ucsd.edu/nvmw2022-program/nvmw2022-data/nvmw2022-paper35-final_version_your_extended_abstract.pdf>.

   I enjoy several aspects of pm-‘gawk’.  It's unobtrusive; as you gain
familiarity and experience, it fades into the background of your
scripting.  It's simple in both concept and implementation, and more
importantly it simplifies your scripts; much of its value is measured
not in the code it enables you to write but rather in the code it lets
you discard.  It's all that I needed for my dissertation research 25
years ago, and more.  Anecdotally, it appears to inspire creativity in
early adopters, who have devised uses that pm-‘gawk’'s designers never
anticipated.  I'm curious to see what new purposes you find for it.



Tag Table:
Node: Top812
Node: Introduction2028
Ref: Introduction-Footnote-14431
Node: Quick Start4535
Node: Examples7630
Node: Performance16719
Node: Constant-Time Array Access17427
Node: Virtual Memory and Big Data20777
Ref: Virtual Memory and Big Data-Footnote-124381
Node: Sparse Heap Files24521
Node: Persistence versus Durability27710
Ref: Persistence versus Durability-Footnote-131171
Ref: Persistence versus Durability-Footnote-231417
Node: Experiments31811
Node: Results43546
Node: Data Integrity47171
Ref: Data Integrity-Footnote-150009
Ref: Data Integrity-Footnote-250106
Ref: Data Integrity-Footnote-350258
Ref: Data Integrity-Footnote-450352
Node: Acknowledgments50731
Node: Installation52063
Node: Debugging57872
Node: History59767

End Tag Table


Local Variables:
coding: utf-8
End:
